Wiredocean SBS 1000 Installation Guide download pdf (Page 23)

I. Introduction

This Installation Guide is for installers of the SBS and should be used

in conjunction with the main sections of this Owner’s Handbook.

Please read the Owner’s Handbook, especially Sections 1.1 and 2.1,

before proceeding.

II. Equipment Requirements

The following items are required to complete installation of the SBS:

 A Ku-band satellite receive antenna (TVRO). The SBS is

designed to operate with TVROs using a 'Universal LNB' -

having local oscillator frequencies of 9.750 GHz and 10.6 GHz

and tuning range between 10.7 GHz and 12.75 GHz. If the

TVRO has a Universal Quad LNB, in which each output is

separately powered and independently supplies high/low

vertical/horizontal to the terminated device, the SBS can be

connected directly to the LNB.

 In some cases a multiswitch (for example the Triax TMS5X8P)

should be installed between the TVRO and the SBS:

► With a Single Output LNB a multiswitch will enable the

TVRO to feed the television receiver(s) and the SBS

simultaneously.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 29 30 31

No comments

Wiredocean SBS 1000 Installation Guide Page 23